Instructions For Use Of Stroller

1. Front wheel orientation: lift the bayonet on the front wheel bracket to leave the bayonet on the front wheel, and the front wheel can rotate in any direction. 2. Front wheel orientation: press the locking pin on the front wheel bracket to snap it into the bayonet on the front wheel, and the front wheel is in the orientation state. 3. Open the hood: pull the hood stay rod and press the hood buckle on both sides of the hood to open and tighten the hood. 4. Retract the hood: lift up the hood buckles on both sides of the hood and pull the hood rod to retract the hood. 5. Safety belt opening and fastening: fastening: insert the safety buckle plug into the safety socket until you hear the "click" sound. Open: press the safety buckle plug inward and then pull it outward to open it. 6. Shortening and lengthening of safety belt: shortening: lengthen the top ring belt, then lengthen the tail belt and lock it. Length adjustment: lengthen the top ring belt, then shorten the tail belt and lock it. 7. Adjust the backrest: the backrest can be adjusted by two gears. The backrest can be adjusted by fastening the safety buckle behind the backrest. 8. Backrest adjustment: loosen the safety buckle behind the backrest to adjust the low backrest. 9. Brake: press the brake handles on the two rear wheels, and the rear wheels will be in the braking state. 10. Disassembly of the hood: open the barbed buckle behind the hood and pull out the hood plug to remove the hood. Otherwise, the hood can be installed. 11. Folding: raise the backrest and close the hood. First push the safety buckle on the push handle to the right end to make it in a folded state, and then squeeze it into the handle with one hand. The car is folded. After folding, turn the side with bayonet on the front wheel to the rear so that the car can stand stably.